Tiling and Grouts
FIXDER+
Ceramic Tile Adhesive
- TS EN 12004-1
Cement-based, fine-textured adhesive mortar for ceramic and wall tiles.
View product
Made in Mersin, Türkiye · ISO 9001
Professional result.Superior performance.
From tile adhesives to waterproofing and from repair mortars to ETICS systems, we manufacture construction chemicals. Technical data is shown on every product page, and Turkish and English data sheets are available to download.
- products
- 17
- product groups
- 6
- application solutions
- 8
- data sheets
- TR · EN
FLEXDER+ Ceramic and Granite Tile Adhesive 2 / 17
Product groups
From substrate preparation to the final coat, from one manufacturer.
Every product group comes with a technical table, application instructions and a downloadable data sheet. Class and standard badges are shown on the cards.
Find the right product
Pick your application area and see the products layer by layer.
Recommended products are listed in order for eight application areas.
A matched set of products for interior floor and wall tiling in residential, commercial and institutional buildings, from substrate preparation to grouting.
- 1Substrate repair and levellingRP-2605+ · Fine Repair MortarVoids and cracks are repaired to obtain a smooth, level substrate before tiling (3–10 mm).
- 2Tile adhesive (standard)FIXDER+ · Ceramic Tile AdhesiveFine-textured adhesive for ceramic and wall tiles, 3–6 mm bed thickness.
- 3Tile adhesive (porcelain, granite, large format)FLEXDER+ · Ceramic and Granite Tile AdhesiveC2TE-class adhesive for porcelain and granite tiles with water absorption below 3%, marble and natural stone.
- 4GroutingDERZMIX · Tile Grout (1–6 mm)Polymer-modified grout for 1–6 mm joints, applied at least 24 hours after the adhesive has cured.
Featured products
The most requested DERMIX products
Tick “Compare” on up to three cards to review technical data side by side.
Tiling and Grouts
FLEXDER+
Ceramic and Granite Tile Adhesive
- C2TE
- A1
- TS EN 12004-1
- TS EN 13501-1
C2TE-class high-performance adhesive for porcelain, granite ceramic, marble and natural stone.
View product
Waterproofing
DER MX-20
Two-Component Waterproofing Mortar
Fully flexible, polymer-modified waterproofing for balconies, terraces, bathrooms, pools and water tanks.
View product
Repair and Grout
RP-2605+
Fine Repair Mortar
- R2
- EN 1504-3
Fibre-reinforced R2 repair mortar for fair-faced and precast concrete repair and levelling (3–10 mm).
View product
ETICS
DEKOPLAST 2604
Mineral Decorative Render
- A1
- CS III
- W1
- EN 998-1
White-cement based, water-repellent decorative finish coat for façades and ETICS.
View product
ETICS
M-FIX 2601
Thermal Insulation Board Adhesive
Polymer-modified mortar for bonding EPS, XPS and mineral wool boards to mineral substrates.
View product
AAC Blocks
BLOCKFIX Örgü Harcı
AAC Block Jointing Mortar
- M10
- EN 998-2
Cement-based, high-performance thin-bed mortar for laying AAC blocks.
View product
Why DERMIX
We speak with documents, not slogans.
Under one roof
Supply, production, quality control and technical support are handled together at our plant in Mersin Nacarlı OSB.
Certified quality
Our quality (ISO 9001), environmental (ISO 14001) and occupational health and safety (ISO 45001) management systems are certified; the certificates are available on our website as PDFs.
Transparent technical data
An on-page technical table and a bilingual data sheet for every product: pot life, application thickness and strength values are not hidden inside a PDF.
System approach
Matched products from substrate preparation to the decorative finish; every application solution is defined layer by layer.
Application solutions
Bathrooms, terraces, pools, façades: a defined system for every application.
Solution pages show a layered cross-section, the product for each layer and application notes.
Document centre
Technical data sheets for all products on one page, in Turkish and English, together with our ISO certificates. Safety Data Sheets (SDS) are supplied on request.
Request a quote
Let us select the right product for your project.
Tell us about the application area, substrate and specification; our technical team will get back to you on product selection, consumption and application details.